23
simultaneously to remind you to charge the battery as soon as possible.
If the LEDs present abnormal flashing states, please consult the below
troubleshooting table for possible errors and corresponding solutions.
Abnormal LED States
Errors
Solutions
L0
L1
L2
L3
Error1:
LAGOON
Remote Control
communication
failure
1. Make sure the remote
control is powered on.
2. Please refer to
section 4.3
Pairing LAGOON Remote
Control with LAGOON
Battery
to conduct pairing.
Error2:
LAGOON Battery
communication
failure
Please restart the LAGOON
Battery.
Error3:
Other errors of
the battery
Please restart the LAGOON
Battery.
Error4
:
LAGOON Battery
over-temperature
Stop operation and wait
until the temperature falls
within the normal operating
temperature range.
Note: refers to flashing light (an interval of 0.2s, a frequency of 5Hz).
If error1 occurs, L0 and L1 flash alternately with L2 and L3.
If an error occurs in a non-charging state, the LEDs will display the
battery level (for 3s) and the error (for 3s) alternately.
If multiple errors occur simultaneously, the errors will be displayed in
this priority sequence: Error4 Error3 Error1 Error2.
Error4 LAGOON Battery over-temperature may occur during charging.
If the problem persists, please consult ePropulsion authorized dealers
for assistance.
