26
4.2 Use of LAGOON Remote Control
4.2.1 Switching On/Off the Remote Control
Figure 4-4
Below table displays how to switch on/off the LAGOON Remote Control.
Operations
Description
Switch on
In switch-off state, short press the on/off button and
a beep is heard.
Switch off
In switch-on state, press the on/off button and hold
until a beep is heard.
If the remote beeps continuously (and powers off automatically in 10
seconds), it indicates that the button cell inside the remote is running
out and replacement of a new one (model: CR2032) is required. Refer
to
section 4.2.3 Replacing Button Cell for LAGOON Remote Control
.
If you want to stop the running motor at once, please short press the on/
off button.
Before powering on LAGOON Remote Control, make sure the motor
is safely attached to the bottom of the SUP or kayak and keep a safe
distance from the motor to avoid being hurt by the rotating propeller.
If communication fails, LAGOON Remote Control will switch off in 10s.
In normal communication conditions, if the motor stops rotating for
30min, the LAGOON Remote Control will also switch off automatically.