ePropulsion LAGOON User Manual Download Page 31 | Manualshive

Page: 31 / 44

background image

29

4.3 Pairing Remote Control to Battery

LAGOON Remote Control has been paired to LAGOON Battery prior to
delivery, but pairing job has to be carried out if the original LAGOON Battery
or LAGOON Remote Control is replaced with a new one. Users can follow

the following instructions to finish pairing.

1) Turn off the remote control and hold it within 10cm of the battery LEDs.
2) Power on LAGOON Battery (press its power button for 2s). Four LEDs

start to blink alternatively in pairs.

3) Press the power button, LEDs start to flash simultaneously. Then press

the power button for about 5s until the LEDs flash quickly.

4) Press and hold the remote control's on/off button until it issues two beeps

(indicating the remote enters pairing status). Release the button, the
remote control issues another beep and all battery LEDs light up one by
one. Now pairing completes.

If the remote control fails to issue a beep after repleasing the remote
control's power button, it indicates that pairing fails. Check if there is any
mistake in previous operations and try again.

Do not use the remote control out of your SUP/kayak, etc. as the battery
may fail to receive wireless communication signal issued from the
remote control.

«
...
29
30
31
32
33
...
»

Summary of Contents for LAGOON













































Reviews:

No comments

Related manuals for LAGOON

Brand: Painless Performance Pages: 24

Vickers M2-200 Series

Brand: Eaton Pages: 13

Brand: Rato Pages: 65

Brand: FAAC Pages: 7

Diesel Stage 2 Boost Cooler

Brand: Snow Performance Pages: 20

WEST EUROTECH 36 T2

Brand: Weston UK Pages: 3

Brand: MINN KOTA Pages: 42

SW Brushless Series

Brand: Swiwin Pages: 14

Brand: Volvo Pages: 11

Brand: Volvo Pages: 36

Brand: Volvo Pages: 48

Brand: Chicago Pneumatic Pages: 100

Rexroth Brueninghaus Hydromatik A2F/6.1 Series

Brand: Mannesmann Pages: 20

Brand: DANA Pages: 2

Brand: DANA Pages: 3

Brand: DANA Pages: 3

Brand: DANA Pages: 3

Brand: DANA Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands