BIOS
P2-133A
Page 4-19
Power On Method: There are “Button Only”, “Hot Key” and “Any key” can be
chosen by this field that allows users to select one of these various functions as
Power On Method for their requirement.
The default value in this selection is “ Hot Key”. (Ctrl-F1)
Hot Key: User can press “Control Key” (Ctrl) and “Function Key” (from F1
to F12) individually to power on the system.
The interval between “Ctrl” key and function Key (F1-F12) must be short.
Anykey: Press anykey to power on the system.
Button Only: This power on method is controlled by J3 (pw-on.) Use Power
On Button to power on the system.
Password: User can Power On the System by password, the password can be
entered from 1 to 5 characters. The maximum of password is 5
characters.
If user forget / lost the password, please go into BIOS setting to change the
Power On Method, or keyin another words as password instead of original one.
4-8 Change Supervisor or
User Password
To change the password, choose the “SUPERVISOR PASSWORD or USER
PASSWORD” option from the CMOS SETUP UTILITY menu and press [Enter].
NOTE: Either “Setup” or “System” must be selected in the “Security
Option” of the BIOS FEATURES SETUP menu.
1. If CMOS is corrupted or the option was not used, a default password stored
in the ROM will be used. The screen will display the following message:
Enter Password:
Press the [Enter] key to continue after the proper password is given.
2. If the CMOS is corrupted or the option was used earlier and the user wishes
to change the default password, the SETUP UTILITY will display a mes-
sage and ask for a confirmation.
Confirm Password: