manualshive.com logo in svg

EPOX P2-133A, User Manual, Page: 16 / 62

Share
Download
EPOX P2-133A User Manual Download Page 16

Features

P2-133A

Page 2-2

•

P2-133A utilizes a Lithium battery which provides environmental protection
and longer battery life.

•

Supports the Universal Serial Bus (USB) connector. The VIA 82C596A chip
provides the means for connecting PC peripherals such as; keyboards,
joysticks, telephones, and modems.

•

Built-in ATX 20-pin power supply connector.

•

Software power-down when using Windows

®

 95/98.

•

Supports ring-in feature (remote power-on through external modem,
allows system to be turned on remotely.

• Resume by Alarm - Allows your system to turn on at a preselected time.

• Power Loss Recovery - In the event of a power outtage your system will

automatically turn itself back on without user intervention.

•

Supports CPU Hardware sleep and SMM (System Management Mode).

•

Supports Desktop Management Interface (DMI) facilitating the management
of desktop computers, hardware and software components and peripherals,
whether they are stand-alone systems or linked into networks.  (optional)

• Supports Hot key, Any key or password Keyboard power ON function

(KBPO).

• Supports USDM software to offer motherboard various status on Windows

®

95/98, or Windows

®

 NT 4.0/5.0.

• Supports the CPU, PWR and Chassis fan Auto stop in sleep mode.

• Supports the System Power LED (PANEL) blinks in the sleep mode.

• Built-in WOL (Wake On Lan) Connector.

• Built-in SB-LINK Header for Creative Blaster

®

  AWE64D PCI Bus Sound

Card.

Summary of Contents for P2-133A































































Reviews:

No comments