manualshive.com logo in svg

EPOX P2-133A, User Manual, Page: 37 / 62

Share
Download
EPOX P2-133A User Manual Download Page 37

BIOS

P2-133A

Page 4-7

uses the RAMDAC of the PCI card.
Disabled:  Disables the VGA card Palette Snoop function.

OS Select For DRAM > 64MB:  Some operating systems require special handling.
Use this option only if your system has greater than 64MB of memory.
The default is Non-OS2.

OS2:  Select this if you are running the OS/2 operating system with greater
than 64MB of RAM.
Non-OS2:  Select this for all other operating systems and configurations.

Report No FDD For WIN95:  This option allows BIOS to indicate whether
WIN95 is with FDD or not. The Default value is Yes.

NO: Report No FDD for WIN95.
YES: Report FDD for WIN95

Video BIOS Shadow:  This option allows video BIOS to be copied into RAM.
Video Shadowing will increase the video performance of your system.
The default is Enabled.

Enabled: Video shadow is enabled.
Disabled: Video shadow is disabled.

C8000 - CBFFF Shadow:
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:

These categories determine whether ROMs from option cards will be copied into
RAM.  This will be in 16K byte or 32K byte units, and the size will depend on chipset
of the option card.

Enabled:  Optional shadow is enabled.
Disabled:  Optional shadow is disabled.

Summary of Contents for P2-133A































































Reviews:

No comments