EPOX mu-3vsa, User Manual

Page: 37 / 64

BIOS
Page 4-16
Min. saving : Minimum power savings. Inactivity period is 1 hour in each mode.
User define : Allows user to define PM Timers parameters to control power
saving mode.
PM controlled by APM : This option shows weather or not you want the Power
Management to be controlled the Advanced Power Management (APM).
The default is Yes.
Yes : APM controls your PM
No : APM does not control your PM
Video Off Option : Tells you what time frame that the video will be disabled
under current power management settings. The default is Standby.
All Modes-> Off : Video powers off after time shown in doze mode setting.
Suspend->Off : Video powers off after time shown in suspend mode setting.
Always On : Video power off not controlled by power management.
Video Off Method : This option allows you to select how the video will be disabled
by the power management. The default is V/H Sync + Blank
V/H Sync + Blank : System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
DPMS : Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the software
supplied for your video subsystem to select video power
management values.
Blank Screen : System only writes blanks to the video buffer.
MODEM Use IRQ : Name the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Default is IRQ 3.
N/A : No IRQ is used. 3 : IRQ 3
4 : IRQ 4 5 : IRQ 5
7 : IRQ 7 9 : IRQ 9
10 : IRQ 10 11 : IRQ 11
Soft-Off by PWRBTN : Use this to select your soft-off function.
The default is Instant Off.