EPOX mu-3vsa, User Manual

Page: 30 / 64

BIOS
Page 4-9
4 : 4MB of systems memory accessable by the AGP card.
8 : 8MB of systems memory accessable by the AGP card.
16 : 16MB of systems memory accessable by the AGP card.
32 : 32MB of systems memory accessable by the AGP card.
64 : 64MB of systems memory accessable by the AGP card.
128 : 128MB of systems memory accessable by the AGP card
256 : 256MB of systems memory accessable by the AGP card.
AGP-4x Mode : Chipset AGP Mode support.
Options: x1 , x2 and x4.
AGP Driving Control : This item allows you to adjust the AGP driving force.
Choose Manual to key in a AGP Driving Value in the next selection. This field is
recommended to set in Auto for avoiding any error in your system.
AGP Fast Write : Selecting Enabled allows to use Fast Write Protocol for 4X
AGP.
OnChip USB : USB Connector.
The choice: Enabled, Disabled.
USB Keyboard Support : This controls the activation status of an optional USB
keyboard that may be attached. The default is disabled.
Enabled : Enable USB keyboard support.
Disabled : Disable USB keyboard support.
OnChip Sound: Turn on/off onchip sound device.
CPU to PCI Write Buffer : When enabled, up to four D words of data can be
written to the PCI bus without interruting the CPU. When disabled, a write buffer
is not used and the CPU read cycle will not be completed until the PCI bus signals
that it is ready to receive the data.
The Choice: Enabled, Disabled.
PCI Dynamic Bursting : When Enabled, data transfers on the PCI bus, where
possible, make use of the high-performance PCI bust protocol, in which graeater
amounts of data are transferred at a single command.
The Choice: Enabled, Disabled.