EPOX EP-6ZXM, Manual, Page: 51 / 76

BIOS
EP-6ZXM
Page 4-21
Onboard Primary PCI IDE: The default value is Enabled.
Enabled: Enables Onboard IDE primary port.
Disabled: Disables Onboard IDE primary port.
Onboard Secondary PCI IDE: The default is Enabled.
Enabled: Enables Onboard IDE secondary port.
Disabled: Disables Onboard IDE secondary port.
USB Keyboard Support: This controls the activation status of an optional USB
keyboard that may be attached. The default is Disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
Init Display First: If two video cards are used (1 AGP and 1 PCI) this specifies
which one will be the primary display adapter. The default is PCI Slot.
PCI Slots: PCI video card will be primary adapter.
AGP:
AGP video card will be primary adapter.
Power On Function: There are “Button Only”, “Hot Key” and “Any key” can be
chosen by this field that allows users to select one of these various functions as
Power On Method for their requirement. The default value in this selection is “
Hot Key”. (Ctrl-F1)
Hot Key: User can press “Control Key” (Ctrl) and “Function Key” (from
F1 to F12) individually to power on the system. The interval
between “Ctrl” key and function Key (F1-F12)must be short.
Anykey: Press anykey to power on the system.
Button Only: This power on function controlled by J3 (pw-on.) Use Power On
Button to power on the system.
Password: User can Power On the System by password, the password can be
entered from 1 to 5 characters. The maximum of password is 5
characters. If user forget / lost the password, please go into BIOS
setting to change the Power On Method, or keyin another words as
password instead of original one.
KB Power On Password: When the option of “Power On Function” is password
selected, user uses the item to key in password.