EPOX EP-6ZXM, Manual, Page: 39 / 76

BIOS
EP-6ZXM
Page 4-9
EDO CASx# MA Wait State: This allows the option to insert an additional wait
state before the assertion of the first CASx# for page hit cycle. The default is 2.
1: Inserts one wait state.
2: Inserts two wait states.
EDO RASx# Wait State: This allows the option to insert an additional wait state
before RAS# is asserted for row misses.
1: Inserts one wait state.
2: Inserts two wait states.
SDRAM RAS-to-CAS Delay: This allows the option to insert a timing delay
between the CAS and RAS strobe signals (used when SDRAM is written to, read
from, or refreshed). The default is 3.
2: Provides faster memory performance.
3: Provides slower memory performance.
SDRAM RAS Precharge Time: The precharge time is the number of cycles it
takes for the RAS to accumulate its charge before SDRAM refresh. If insuffi-
cient time is allowed, refresh may be incomplete and the SDRAM may fail to
retain data. The default is 3.
2: Provides faster memory performance.
3: Provides better memory compatibility.
SDRAM CAS Latency Time: This setting defines the CAS timing parameter of
the SDRAM in terms of clocks. The default is 3.
2: Provides faster memory performance.
3: Provides better memory compatibility.
SDRAM Precharge Control: The default is Enabled.
Enabled: Enables the option.
Disabled: Disables the option.
DRAM Data Integrity Mode: Use this option to configure the type of DRAM in
your system. The default is Non-ECC.
Non-ECC:
If your memory is Non-ECC memory, choose this option.
ECC: If your memory is ECC memory, choose this option.