EPOX EP-6ZXM, Manual, Page: 15 / 76

Features EP-6ZXM
Page 2-1
Section 2
FEATURES
EP-6ZXM Features:
• EP-6ZXM is based on the Pentium
®
II or Pentium
®
III Processor operating
at 233 ~ 400MHz (66MHz) or 300 ~ 550MHz (100MHz) on Slot 1. The
board is configured by an Easy-Setting-Daul-Jumper (E.S.D.J.) to match
your CPU clock speed.
• Designed with Intel’s 82443 ZX AGPset.
• Supports up to 256 MB of DRAM (minimum of 16 MB) on board, You
can use 168-pin DIMM x 3. It will automatically detect Extended Data
Output (EDO) DRAM at 66MHz only or Synchronous DRAM memory
(SDRAM) at 66MHz or 100MHz (please see Section 3-2).
• EP-6ZXM will not support Error Checking and Correcting (ECC) when
using paritys DRAM memory modules.
• Supports (1) 16 bit ISA slots, (3) 32 bit PCI slots, (1) AGP slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33 devices. The EP-6ZXM supports (3) PCI
Bus Master slots and a jumperless PCI INT# control scheme which reduces
configuration confusion when plugging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
• Designed with Winbond W83977TF/EF Multi I/O: (1) floppy port, (1)
parallel port (EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Includes a PS/2 mouse connector.
• Allows use of a PS/2 keyboard.
• Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com
please visit our Technical Support section for the latest updates).