EPOX EP-6ZXM, Manual, Page: 45 / 76

BIOS
EP-6ZXM
Page 4-15
Standby Mode: When the standby mode timer times-out, it will enter the standby
mode and retain CPU at a slow working speed. The screen will be blanked out.
Suspend Mode: This function works only when the Pentium II Processor is
installed. The timer starts to count when “System Standby” mode timer is timed
out and no “PM Events” are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
Throttle Duty Cycle: Sets how much performance will be lost during a power
management mode. Default is 62.5%.
PCI/VGA Act-Monitor: Use this option if your monitor has advanced power
saving features. The default is Disabled
Enabled: Your monitor’s power features will be included in power
management.
Disabled: Your monitor’s power features will not be included in power
management.
Soft-Off by PWR-BTTN: Use this to select your soft-off function.
The default is Delay 4 sec.
Instant Off: Turns off the system instantly.
Delay 4 Second : Turns off the system after a 4 second delay. If momentary
press of button, the system will go into Suspend Mode. Press
the power botton again to take system out of Suspend Mode.
CPUFAN Off In Suspend: This option is used to set if the CPU fans will turn off
during suspend mode. The default is Enabled.
Enabled: The system will turn off the CPU fans during suspend mode.
Disabled: The system will not turn off the CPU fan during suspend mode.
Power Loss Recovery: If the power to the system is cut off, the system will
turn itself back on with no user intervention. The default is Disabled.
Enabled: The system will power back on after a power interuption.
Disabled: The system will stay off after a power interuption.