EPOX EP-6ZXM, Manual, Page: 12 / 76

Introduction EP-6ZXM
Page 1-6
I/O Shield Connector
The EP-6ZXM is equipped with an I/O back panel. Please use the appropriate I/O
shield (figure 3).
MicroATX
POWER SUPPLY
Power-On/Off (Remote)
The EP-6ZXM has a single 20-pin connector for MicroATX power supplies. For
MicroATX/ATX power supplies that support the Remote On/Off feature, this
should be connected to the systems front panel for system Power On/Off button.
The systems power On/Off button should be a momentary button that is normally
open.
The EP-6ZXM has been designed with “Soft Off" functions. You can turn Off the
system from one of two sources: The first is the front panel Power On/Off the
button, and the other is the "Soft Off" function (coming from the EP-6ZXM’s
onboard circuit controller) that can be controlled by the operating system.
Windows 95/98 will control this when the user clicks that they are ready to
Shutdown the system.
Figure 4: Simple MicroATX/ATX Power
ON/OFF Controller
Figure 3: I/O back panel layout
PS/2 Mouse
PS/2
KEYBOARD
USB port
COM1 COM2
parallel port
Speaker
Line_in
MIC
Joystick/Midi port
J3
Case (chassis) Power
ON/OFF button