Epiroc RD 100, Safety And Operating Instructions Manual

Page: 18 / 32

Safety and operating instructions
18 © Construction Tools PC AB | 98001365 01 | 2020-09-24
Original Instructions
6.1.3 Attaching pusher leg to rock drill
A
B
1. Make sure that the pin (A) and the machine attach-
ment are clean.
2. Pull out the locking lever (B) and turn counterclock-
wise to lock it in the open position.
3. Mount the pusher leg to the rock drill.
4. Turn the locking lever (B) clockwise to secure the
pusher leg. Make sure that the lever gets pushed all
the way in.
5. Fill the pusher leg with water by extracting and re-
tracting it a few times.
6.2 Controls
6.2.1 Water flushing lever (RD 100)
A
B
+
-
1
0
The rock drill is equipped with throttle levers for regulat-
ing the water flushing.
A. Water flushing adjust.
B. Manual water flushing.
6.2.2 Throttle lever (RD 100)
A
A
Adjust the throttle by using the throttle lever as follows:
1. Pull the throttle lever (A) to start and increase the
throttle.