background image

Safety and operating instructions

© Construction Tools PC AB | 98001365 01 | 2020-09-24

Original Instructions

7

3.2.4 Drugs, alcohol or medication

 

WARNING

 

Drugs, alcohol or medication

Drugs, alcohol or medication may impair your judgment

and powers of concentration. Poor reactions and incor-

rect assessments can lead to severe accidents or death.

u

Never use the machine when you are tired or under

the influence of drugs, alcohol or medication.

u

No person who is under the influence of drugs, alco-

hol or medication may operate the machine.

3.3 Installation, precautions

 

DANGER

 

Compressed gas, explosion hazard

The accumulator is pressurized even when the hydraulic

system is shut off. To dismount the accumulator without

first releasing the nitrogen gas can cause serious per-

sonal injury or death.

u

Fill the high-pressure accumulator with nitrogen (N

2

)

only.

u

Only authorised personnel are qualified to work with

the accumulator.

 

WARNING

 

Whipping hose

Hoses under pressure can whip uncontrollably if screws

loosen or are loosened. A whipping hose can cause se-

vere injuries. To reduce this risk:

u

Depressurise the system before loosening the con-

nection of a hose.

u

Tighten the nuts on the connections of the hoses to

required torque.

u

Check that the hose and the connections are not

damaged.

u

Never carry the machine by the hoses.

 

WARNING

 

Hydraulic oil at high pressure

Thin jets of hydraulic oil under high pressure can pene-

trate the skin and cause permanent injury.

u

Immediately consult a doctor if hydraulic oil has pen-

etrated the skin.

u

Never use your fingers to check for hydraulic fluid

leaks.

u

Keep your face away from any possible leaks.

 

WARNING

 

Hydraulic oil

Spilled hydraulic oil can cause burns, accidents due to

slippery conditions and will also harm the environment.

u

Take care of all spilled oil and handle it according to

your safety and environmental regulations.

u

Never dismount the hydraulic machine when the hy-

draulic oil is hot.

u

Never run any hydraulic lines for attachment of the

hydraulic machine through the drivers cab.

 

WARNING

 

Ejected working tool

If the tool retainer on the machine is not in a locked posi-

tion, the working tool can be ejected with force, which

can cause personal injury.

u

Never start the machine while changing the working

tool.

u

Before changing the working tool or accessories,

stop the machine and turn off the power source.

u

Never point the working tool at yourself or anyone

else.

u

Make sure that the working tool is fully inserted and

the tool retainer is in a locked position before the ma-

chine is started.

u

Check the locking function by pulling the working tool

outwards forcefully.

 

WARNING

 

Moving or slipping insertion tool

An incorrect dimension of the inserted tool’s shank can

result in that the inserted tool is lost or is slipping out

during operation. Risk of severe injury or crushed hands

and fingers.

u

Check that the insertion tool has the shank length

and dimensions that the machine is intended for.

u

Never use an insertion tool without a collar.

 

WARNING

 

Injured hands

There is a risk of injured fingers when mounting the

pusher leg on the rock drill. To recuce this risk:

u

Never inspect, clean, install, or remove the pusher

leg while the power source is connected.

u

Never put the fingers between the rock drill and

pusher leg attachment.

 

CAUTION

 

Skin eczema

Hydraulic oil can cause eczema if it comes in contact

with the skin.

u

Avoid getting hydraulic oil on your hands.

u

Always use protective gloves when working with hy-

draulic oil.

u

Wash hands after contact with hydraulic oil.

Summary of Contents for RD 100

































Reviews: