manualshive.com logo in svg

epiphan KVM2Ethernet, User Manual, Page: 91 / 188

Share
Download
epiphan KVM2Ethernet User Manual Download Page 91

5. Windows Network Discovery Utility

Starting the Network Discovery Utility

User Guide

Page 91

• VGA2Ethernet and KVM2Ethernet firmware (that you can 

install on the VGA2Ethernet or KVM2Ethernet device). See 

“Firmware Upgrade” on page 123

.

• VGA2Ethernet or KVM2Ethernet drivers and application 

software which includes the Network Discovery Utility.

Follow the instructions in 

“Installing the Drivers and Application 

for Windows” on page 21

 to download and install the latest 

version of the VGA2Ethernet or KVM2Ethernet drivers and 

application.

Starting the Network Discovery Utility

Start the Network Discovery Utility from the Windows Start 

menu by selecting 

Start > Epiphan VGA2Ethernet > 

VGA2Ethernet DirectShow Config

.

The Network Discovery Utility starts up and looks for Epiphan 

devices on the network. If an Epiphan device is operating, has an 

IP address on the network, and is connected to the network, the 

Network Discovery Utility will find it and display information for 

it.
For each Epiphan device, the Network Discovery Utility displays 

a name, serial number, IP address and status (such as device OK, 

or Not Found).

Figure 38

 shows the Network Discovery Utility connected to a 

VGA2Ethernet device at IP address 192.168.20.21 and a 
KVM2Ethernet device at IP address 192.168.20.102.
If a device is selected and is capturing images, the current 

captured image should appear on the Network Discovery Utility 

interface and the status of the device should be Device OK, shown 

with a green indicator. If the device is not capturing images the 

Device OK indicator can still appear but the display will not show 

a captured image. 

Summary of Contents for KVM2Ethernet





























































































































































































Reviews:

No comments