epiphan KVM2Ethernet, User Manual

Page: 41 / 188

3. Windows VGA2Ethernet user interface Common Procedures
User Guide Page 41
To save a snapshot of the current image as an image file
You can use the following procedure to save the current image as
a bmp, png, or jpg file on the video capture workstation. You can
optionally pause image capture before saving an image.
1 Select Save from the File menu or from the toolbar select .
The status bar shows the location and name of the saved file.
The first time you save an image the Save As dialog appears
and you can specify the file name, file type, and location of the
saved image file.
When you select Save again, the VGA2Ethernet user interface
saves the new image with the same file name and location,
overwriting the previously saved file. You can select Save As
to save the image with a different file name, file type, or
location.
You can open the saved image file with most bitmap image
editing applications.
To print a snapshot of the current image
You can use the following procedure to print the current image
on any printer that is connected to the video capture workstation.
You can optionally pause image capture before printing an
image.
1 Select Print from the File menu or from the toolbar select .
The current image is sent to the default printer. You can select
Print Setup from the file menu to select a different printer and
set printer options.
Note: You can also configure the VGA2Ethernet user interface to
invert colors for printing. From the Tools menu select Options
then select the Display tab and select Invert colors for printing.
Recording Captured Images
You can record captured images as a video file or as a series of
image files.