Quadro Manual I: Installation Guide
Appendix: Changing the Admin Password
Quadro2x, 2xi; Quadro4x, 4xi; Quadro16x, 16xi (SW Version 5.3.x)
51
Fig. I-41: Change Password page
The
Phone Access Password
offers the following components:
•
The
Old Password
field requires the current password of the
Administrator
. An
error message prevents entering the wrong password.
•
The
New Password
field requires a new password for the
Administrator
. Reen-
tering the new password in the
Confirm New Password
field will confirm the
new password. The
New Password
field is checked against its strength and you
may see how strong is your inserted password right below that field. The pass-
word can consist of numeric values only. Up to twenty (0-20) digits are allowed. A
corresponding warning appears if any other symbols are inserted.
Please Note:
If
Administrator
is changing the
Local Administrator
or
Extension
pass-
words or
Local Administrator
is changing the
Extension
password then the
Old Pass-
word
field is not displaying.
Attention:
It is highly recommended to define a proper and non-empty password on this
page if the extension is being used for the Call Relay service from the Quadro's
Auto At-
tendant.
Write down the password somewhere and keep it in a secure place. If the password is lost,
a factory reset will be required on the unit (see Administrator's Guide, Hardware Overview).
All settings are lost after a factory reset. After a factory reset the default password (19) will
be restored.
