Quadro Manual I: Installation Guide
Step 2: Configuring the Quadro
Quadro2x, 2xi; Quadro4x, 4xi; Quadro16x, 16xi (SW Version 5.3.x)
30
WAN Interface Configuration
If your ISP requires a specific MAC address, (for example, for authentication), it can be en-
tered on this page. The required MAC address can be entered into the
User defined
field.
If a specific MAC address is not required, leave the default selection
This device
selected.
Fig. I-26: W AN Interface Configuration page
Use the
MTU
drop down list
to select the maximum packet size on the Ethernet (in bytes).
Click
Next
to display the
DNS Settings
page.
DNS Settings
For DNS, the selection is set to
Dynamically by Provider
. When using a static IP address,
fixed values must be entered.
Fig. I-27: DNS Settings page
