Epever SolarV TRIRON Series, User Manual

Page: 38 / 59

Copyright© 2022 SolarV GmbH All rights reserved.
33
Battery type
Battery parameters
Sealed/Gel/Flooded
User
LiFePO4 User Li(NiCoMn)O2 User
Over voltage disconnect voltage BCV+1.4V*voltage level BCV+0.3V*voltage level BCV+0.3V*voltage level
Charging limit voltage BCV+0.6V*voltage level BCV+0.1V*voltage level BCV+0.1V*voltage level
Over voltage reconnect voltage BCV+0.6V*voltage level BCV+0.1V*voltage level Boost charging voltage
Equalize charging voltage BCV+0.2V*voltage level Boost charging voltage Boost charging voltage
Boost reconnect charging voltage FCV-0.6V*voltage level FCV-0.6V*voltage level FCV-0.1V*voltage level
Under voltage warning recover
voltage(UVWR)
UVW+0.2V*voltage level UVW+0.2V*voltage level UVW+1.7V*voltage level
Under voltage warning
voltage(UVW)
LVD+0.9V*voltage level LVD+0.9V*voltage level LVD+1.2V*voltage level
Discharging limit voltage LVD-0.5V*voltage level LVD-0.1V*voltage level LVD-0.1V*voltage level
34
5.1.3 Remote Setting
1
˅ ˅
Setting the battery parameters by PC software
Connect the controller's RJ45 port to the PC's USB port via a USB to RS485 cable. When selecting
the battery type as "USE," set the voltage parameters by the PC software.
2 ˅ ˅ Setting the battery parameters by APP
x
Via an external WiFi module
Connect the controller to an external WIFI module through a standard network cable. End-users
can set the voltage parameters by the APP after selecting the battery type as "USE." Refer to the
cloud APP manual for details.
x
Via an external Bluetooth module
Connect the controller to an external Bluetooth module through a standard network cable.
End-users can set the voltage parameters by the APP after selecting the battery type as "USE."
Refer to the cloud APP manual for details.
3
˅ ˅
Setting the battery parameters by MT50