REV. 12/2020
10
D
Load Wheels-Removal and Installation
Make sure the lifting equipment is solid and
secure, and the load capacity should be
greater than the total weight of the vehicle.
Place a wooden wedge under the chassis
near load wheel, make the load wheel off the
ground.
When replacing wheels, be sure that the truck
won't tilt.
Remove the coiled elastic cylindrical pin(1)
within the wheel bridge with an ejector pin of
4mm in diameter;
Turn the wheel bridge to vertical direction,
knock out the wheel pin shaft(3) from side, and
remove the load wheel and bearing assembly;
Remove the bearing(5) of load wheel(4) with
hammer and jacking equipment.
1.2.6
CAUTION
CAUTION
Loosen the set screw (1) in the fork leg with a
wrench;
Knock out the wheel pin shaft (2) from side,
and remove washers(3), load wheel and
bearing assembly;
Remove the bearing (5) of load wheel (4) with
hammer and jacking equipment.
Removal
Lift the vehicle carefully with lifting equipment
through the lifting holes at back;
