REV. 12/2020
16
B
2.3.8
Loading
Before lifting a load, ensure that its weight does not exceed the truck’s maximum load capacity.
Refer to the rated load capacity specified on the truck’s nameplate.
Ensure that the load is stable and uniform to prevent any partial spillage.
Check that the width of the load is compatible with the width of the forks.
Picking up a load from the ground
Approach goods carefully when driving the vehicle.
Lower the forks so that they can easily be inserted into the pallet.
Insert the forks below the pallet.
If the goods are shorter than the forks, move the goods a few centimetres from the end of the forks
so as not to scratch the goods in front.
Lift the goods a few centimetres.
Safety footwear must be worn.
CAUTION
CAUTION
Do not touch nearby loads or loads positioned at the side or in front of the load being handled.
Arrange the loads with a small space between them to prevent them coming into contact with one
another.
2.3.7
Drive switch
The drive directions of the truck are forward (2)
and reverse (1).
1
2
Fig2108-00028OM