/ OFF
■
SERVICING
This device has an expected service life of about 2.500 therapy cycles, basing on an
average therapy duration of 8 min. Parts as filter and accessories must be
replaced periodically (see “CLEANING AND MANTEINANCE”).
FILTER REPLACEMENT PARTS (H)
The filter has to be substituted after 30 hours of use or when it becomes grey.
For filter replacing, raise the lid using a flat screwdriver as shown in the picture I.
Remove the filter and fit the new filter (10).
Fit the filter carrier lid into its housing making sure it is adherent to the surface.
■
DEVICE’S TECHNICAL FEATURES
Piston rotary presser, without lubrification.
Medical device of class IIA according to Directive 93/42/CEE annex IX
Medicine Cup: Particles dimension < 5µm MMAD (EN13544-1)
Intermittent use: 20minutes - ON / 40minutes – OFF
Nominal voltage: 230 V
~
Frequency: 50 Hz
Power: 120 VA
Operating conditions:
Ambient temperature: min 5°C – max 40°C
Air humidity: min 15% RH – max 93% RH
Atmospheric pressure: min 700hPa – max 1060hPa (max operating altitude
≤
2000m)
Storage conditions :
Ambient temperature: min -25°C / max +70°C
Air humidity: min 0% RH – max 93%RH
Atmospheric pressure: min 500 hPa – max 1060 hPa
■
SYMBOLS
Alternate current
Medical CE mark ref. Dir 93/42 CEE
Double insulation
Do not use the appliance when taking a bath
or shower
BF applied part
Switch ON
Obligation to read instruction manual
Switch off
General warning symbol
Read instruction manual
Protection against solid and liquid bodies
penetration (protected against solid bodies
over 12mm. protected against access with
a finger; protected against vertically falling
water drops.)
Keep dry
This product (including its related accessories) must be delivered at the end of its service life at a collection point for
the recycling by electric and electronic devices, by the user or by His dealer.
/ ON
IP21
