EO a7400 User Manual Download Page 89

Page: 89 / 128

Chapter 04:

Using Your eo Ultra-Mobile Tablet PC with Microsoft® Windows® 7

Adjusting Audio Playback

The

Speakers

tab is where you can control the way your eo

Ultra-Mobile Tablet PC plays back audio. Here you can adjust the

system volume level, set the default playback device (internal

speaker or headphones/external speakers), specify the type of

speakers attached to the system, set environmental presets for

sound effects, and specify the audio playback format.

Volume Level

The

Main Volume

section at the top of the Speakers tab has

controls for stereo balance (left and right), system volume

(affects overall volume levels of all playback sounds, use the

volume control panel to adjust individual sound sources), and

volume muting. The volume level applies to the default audio

playback device.

Set Default Playback Device

This drop down sets which audio playback device (internal

speakers, headphone/external speakers, connected USB audio

device) will output system audio.

Summary of Contents for a7400

































































































































Search results

Summary of Contents for a7400

Reviews:

Related manuals for a7400

Brands by name

Popular brands

EO a7400, User Manual

Search results

Summary of Contents for a7400

Reviews:

Related manuals for a7400

Brands by name

Popular brands