AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER
DO NOT THROW AWAY
34
10
Electric Connections Accessories
Connection examples multiple switch
A multiple switch can be connected to the modular connector X2 of the units. This modular connector
X2 is directly accessible at the rear of the display cover (see page 33) without having to take it off.
Multiple switch with filter indication
Wireless remote control (without filter indication)
Additional multiple switch with filter indication
Additional multiple switch
with wireless remote control
Wire colours C1 - C6 may vary dependent
on the type of modular cable used.
Note: For the modular cable use, the “tab” of both modular
connectors must be mounted facing the mark on the modular cable.
A = energiSava 300/400
B = Multiple switch with
filter indication
A = energiSava 300/400
B = Receiver for wireless remote control
C = Transmitter with 4 settings (e.g.
kitchen)
D = Transmitter with 2 settings (e.g.
bathroom)
E = Any additional 2- or 4-settings
transmitters (A maximum of 6
transmitters can be signed on to 1
receiver)
A = energiSava 300/400
B1 = Multiple switch
with filter indication
B2 = Additional multiple
switch with filter
indication
C = Splitter
A = energiSava 300/400
B = Multiple switch with
filter indication
C = Receiver for wireless
remote control
D = Transmitter with 2
settings
E = Splitter
Summary of Contents for energiSava 300
Page 1: ......
Page 40: ...SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL 39 10 Servicing...
Page 47: ......
