SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
15
04
Installation Instructions
Placing the appliance
The energiSava 300 & 400 units can be
mounted directly to the wall using the
suspension brackets supplied for that
purpose. For a vibration-free result the
appliance must be mounted to a solid wall
with a minimum mass of 200 kg/m
2
. A
gypsum block or metal stud wall will not
suffice. Additional measures such as double
panelling or extra studs are required in
that case. On request, a mounting support
for floor mounting is available. In addition,
the following aspects must be taken into
account.
• The appliance must be placed level.
• The installation room must be such that a
good condensate discharge with air trap
and pitch for condensate can be made.
• The installation room must be frost-free.
• Make sure there is a free space of at least
70 cm at the front of the appliance and
a free headroom of 1.8m for cleaning the
filters and carrying out maintenance.
• Make sure there is a free space of at least
20 cm above the display cover so it can
always be removed.
Connecting the condensate discharge
The condensate discharge line for the
units is fed through the lower panel. The
condensate must be discharged through a
drainpipe. EnviroVent recommend using
KITCONDENSATE-BK.
Alternatively use a U-trap (sold separately)
which the installer must screw it into the
underside of the appliance.
This condensate discharge connection has
an external connecting diameter of 32 mm.
The condensate discharge line can be glued
to it, if necessary using a square bend. The
installer can glue the condensate discharge
in the desired position in the lower part of
the appliance. The drain must discharge
under the water level in the U-trap. Before
connecting the condensate discharge to
the appliance, pour water into the U-trap to
create an air trap.
Note:
Add a teaspoon of oil to prevent
drying out. Alternatively use a non return
valve in place of the U-trap.
(Not used for UK)
Recommended
(KITCONDENSATE-BK)
Summary of Contents for energiSava 300
Page 1: ......
Page 40: ...SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL 39 10 Servicing...
Page 47: ......
