Envirovent energiSava 300, Installation Manual

Page: 24 / 48

SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
23
Readout menu
The readout menu can be used to call up a
number of current sensor values to obtain more
information on the appliance’s performance.
Modifying values of settings is not possible in
the readout menu. The readout menu can be
displayed as follows.
1. In operating mode, press the ‘MENU’ key.
Now the display shows the settings menu.
2. Use the ‘+’ and the ‘-’ key to go to the
readout menu.
3. Activate the readout menu.
4. Use the ‘+’ and the ‘-’ key to scroll through
the menu.
5. Press the ‘R’ key twice to go back to
operating mode. If no key is operated for 5
minutes, the appliance automatically returns
to operating mode.
05 Control Display
Step no.
readout value
Description readout value Unit
01 Current temperature from dwelling °C
02 Current temperature outdoors sensor °C
03 Bypass status (ON = bypass valve open, OFF = bypass valve closed)
04 Status frost protection (ON = frost protection active, OFF = frost protection not active)
05 Current channel pressure supply Pa
06 Current duct pressure extract Pa
07 Current air flow rate supply fan m
3
/h
08 Current air flow rate extract fan m
3
/h
09 Actual relative humidity (optional) %
Operating mode
Settings menu
Readout menu
Step no. readout value;
refer to the table below
for an explanation
Readout value
2 X
Operating mode