38
1. Remove the two (2) screws from the
rear of the baffle, use a ¼” socket or a
flat head screwdriver. Place the provided
brick bracket (Figure 60) at the rear of
the baffle with the slots over the screw
holes (see Figure 60). Insert two (2) of
the provided screws into the two (2)
holes along the bottom of the baffle.
2. Remove the two (2) screws from the front of the
baffle. Slide the top brick panel into the bottom
bracket and place the other brick bracket over the
top of the panel and line up the slots on the bracket
with the holes at the top of the baffle. Use two (2)
of the provided screws to hold the bracket in place.
Ensure the top panel is centered before tightening
the four (4) screws completely (refer to Figure 61).
3. Slide the bottom brick panel into place under/behind
the top panel bracket, the notched side is to rest on
the firebox bottom. The panel should rest flush with
the back of the firebox (refer to Figure 62).
4. Slide each side brick panel into place along the sides
of the firebox. The panels should rest flush with the
back panel and the sides of the firebox (refer to
Figure 63).
i
nstaLLation
oF
P
aneL
s
et
:
Do not install when the unit is hot�
The brick panel set is fragile. Handle panels with care and avoid knocking them on the placement
pins or any other object.
Secondary Installation
Figure 60: Brick panel bracket, slots shown.
Figure 61: Top brick panel in place, screws shown.
Figure 62: Back brick panel in place.
Figure 63: Side brick panels in place.
