36
1. Carefully remove logs from
box. Check to ensure there is
no damage. It is very important
to install all logs in their proper
position to insure safe, optimum
operating conditions.
Figure 54: Step 3 of Log Placement.
Figure 55: Step 4 of Log Placement.
Figure 56: Complete Log Placement.
Secondary Installation
2. Place the log set into the firebox.
Locate each log by seating it down
onto the burner tray support pins.
Follow Figure 52 to Figure 59
3. A bag of ceramic fiber embers
and rock wool embers is provided
gently remove the ember material
from the plastic bag. Spread a
layer loosely in a random manner
across the burner tray. Do not allow
any embers to rest against pilot
assembly. (See diagram provided
for proper ember placement.)
DO NOT pack this ember material
as this could create an unsafe
condition, leave embers loose.
4. Upon the first light up, watch
for ignition to ALL burner ports. If
a long delay is noted: First, wait for
the appliance to cool down.
•
Open the front door of the
appliance.
•
Check to carefully reposition the
embers making sure that burner
ports are not plugged solid or
blocked.
