27
Figure 37: Removal of Stove Top
c
onveRting
t
oP
v
enteD
into
R
eaR
v
enteD
:
This unit has been shipped as a 30,000 Btu/hr top-vented freestanding unit. This unit can be converted to a
rear vented unit with a 36” (915 mm) snorkel for some installation applications.To convert this unit to a rear
vented model you must remove the flue pipe adapter and turn to the rear vent position. See sections
I
nItIal
I
nstallatIon
- I
nstallatIon
of
r
ear
v
ented
a
PPlIance
.
1. Carefully remove the trivet and the stovetop. Place on a soft surface as not to damage the porcelain
finishes (see Figure 37).
2. Remove the four (4) ¼” screws that hold the flue collar elbow to the unit body (see Figure 38).
3. Carefully remove the elbow being sure not to damage the gasket that is glued to the flue collar elbow, it
seals the flue to the firebox.
4. Turn the elbow to the rear vent position and re-fasten with the screws removed in step 2 (see Figure 39).
Initial Installation
QUALIFIED INSTALLERS ONLY
