44
Initial Installation
QUALIFIED INSTALLERS ONLY
Figure 69:
Restrictor Rod Removal
Figure 70: Vent Adapter Removal
8.
Remove the exhaust spigot from the top of the unit by
removing the four (4) T20 screws (see Figure 71). Be deli-
cate with the gasket, you will be reusing this.
9.
Remove the outer and inner block-off plates from the
back of the unit and attach them to the top of the unit
where the exhaust spigot and vent collar were attached
(see Figure 72).
Figure 71: Exhaust Spiggot Removal
Figure 72: Inner Block-Off Plate Removal and Attachment
