Secondary Installation
s
afety
s
cReen
i
nstaLLation
(50-3051):
Q2 Safety Screen
End Cover
Right Mounting Hook
End Cover
Left Mounting Hook
3/8 #8-32 T-20 Screws x 16
The safety screen supplied with the
unit must be assembled first before
it can be installed. When installed,
the screen should not extrude out
any farther than the surround if
the cabinet extensions are installed
(See
Secondary
Installation-
Cabinet Extensions).
Safety Screen Assembly
1.
Attach the left, right, and end
brackets onto the safety screen
using a T20 screwdriver and
the supplied sixteen (16) #8
T20 screws (see Figure 34).
Do not over-tighten the screws
or they might strip out of the
screen frame.
2.
Lift the face upright in front
of the appliance with the
four (4) hooks pointing down
towards the fireplace. Slide the
hooks into the corresponding
brackets on each side of the
cabinet (see Figure 36). Ensure
the hooks are secure before
releasing the safety screen.
Figure 34. Screen Bracket Assembly
Figure 36. Safety Screen Mounting
Figure 35. Screen Mounting Hooks
Page 33
