PIXELATOR (70060)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
9
|
ID: 2114
Hardware version: RevC
Document Updated: May 2021
Web Interface
Configuring the PIXELATOR is done through a web interface which can be brought up on any modern web
browser.
A Chromium based browser (i.e. Google Chrome) is recommended for accessing the PIXELATOR web
interface.
As the PIXELATOR is hosting a web server on the local network and does not feature an SSL Certificate
(used to secure online content), the web browser will display the ‘Not secure’ warning, this is to be
expected.
Identified IP address:
If you are aware of the PIXELATOR IP address (either DHCP or Static), then the address
can be typed directly into the web browsers URL field. The PIXELATOR’s IP address can be located on the
LCD’s Main Menu.
Unidentified IP address:
If you are not aware of the PIXELATOR’s IP address (either DHCP or Static) the
following discovery methods can be used on a local network to discover devices:
An IP scanning software application (i.e. Angry IP Scanner) can be run on the local network to return a
list of active devices on a local network.
Devices can be discovered using Art Poll (i.e. DMX Workshop if set to use ArtNet).
The device Default IP address will be printed on the physical label on the rear of the product.
ENTTEC free NMU (Node Management Utility) software for Windows and MacOS (support up to Mac OSX
10.11), which will Discover ENTTEC devices on the Local Area Network, displaying their IP addresses before
opting to Configure the device, opening the Web Interface.
Note:
The eDMX protocols, the controller and the device using to configure the PIXELATOR must be on the
same Local Area Network (LAN) and be within the same IP address range as the PIXELATOR. For example, if
your PIXELATOR is on Static IP address 10.8.17.38, then your computer should be set to an IP on the similar
subnet i.e. 10.8.17.20. It’s recommended that all devices Subnet Mask are the same across your network.
Home
The landing page for the PIXELATOR web interface is the Home tab. This tab is designed to give you a read-
only device overview.
This will display:
IP Address
Subnet
Broadcast Address
Hardware ID
Art-Net 3 Net
System status
Active Profile
System Name
Packets per sec
License Information
System Version Number
IO version numbers
