PIXELATOR (70060)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
12
|
ID: 2114
Hardware version: RevC
Document Updated: May 2021
be saved to take effect and the PIXELATOR will reboot. Please see the LCD screen on the front of the
PIXELATOR to see the IP address of the unit.
Art-Net3 Address (Net):
Whilst using Art-Net on the PIXELATOR, all universes must be within the same Net
range (example universe range 0-255 or 256 to 511).
sACN CID:
The PIXELATOR’s unique sACN Component Identifier (CID) is displayed here and will be use in all
sACN communication.
Backup and Restore
Full System Backup:
This includes a full backup of the system,
including all settings, options and profiles. This can be used
to later restore the PIXELATOR to previous settings, or can be
used to migrate or duplicate from one PIXELATOR to another.
Full System Restore:
Using a previous backup file, you can
restore a PIXELATOR back to previous settings to migrate or
duplicate from one PIXELATOR to another. Ensure that the file
name matches with the formatting displayed on the web
interface. Warning: This will replace any settings, options and
profiles on the PIXELATOR.
Individual Profile Export:
This will export a single profile from the PIXELATOR, which can be used as a
backup or to migrate to another PIXELATOR. Use the drop down to select the Profile before clicking ‘Export
Profile’.
Individual Profile Import:
This will import a single profile to the PIXELATOR. The profile should have been
taken from another PIXELATOR. Use ‘Choose File’ to locate the profile on your local computer. Click ‘Import
Profile’ to add the new profile to this PIXELATOR’s profile list.
Reset to Factory Defaults:
Warning: This will reset all options, settings and profiles to their Factory Defaults.
After the reset is complete the PIXELATOR will reboot to allow the changes to take place. Please see the LCD
screen on the front of the PIXELATOR to see the IP address of the unit.
Stream Auditor
The Stream Auditor will provide you an overview of the
PLINK outputs as well as the inputs which are being using
on the active profile. Here you can see if signal is being
received and if those values are changing, as well as the
packet information.
Use the Peek button to monitor the values for each
stream.
