Factory Default Settings
8
4
Factory Default Settings
Setting
Default
IP Address
192.168.1.108
Subnet
255.255.0.0
Gateway
192.168.1.1
Block No.
0
Door No.
8001
5
Provision
NOTE ON ENTROTEC CONNECT SERVER
For one-way systems where no PRO-ECS will be fitted, use section 5.1.
For systems where a PRO-ECS is fitted use section 5.2.
Provisioning One Way Systems (without an Entrotec Connect Server)
For one-way systems without an Entrotec Connect Sever, the Call Point can be connected to an
apartment station adopting a peer-to-peer (P2P) network connection. The system configuration is
performed at the PRO-AS7 during initialisation.
5.1.1
Quick Configuration
Connect the PRO-DPA to the PRO-AS7 and power them on. Follow the steps below to initialise the
devices and configure a one-way system:
i.
Tap
One Way
on the PRO-AS7 on the first initialisation screen, then tap
OK
.
(This operation will update the IP address of the apartment station to
192.168.1.155
)
.
FIGURE 5-1
