Provision
13
x.
The setup window (Figure 5-10) will display while the configuration is sent, following this
the Call Point will reboot, and the configuration will be saved. The apartment station will
display the home screen when the system is ready for operation.
FIGURE 5-10
Provisioning Systems with an Entrotec Connect Server
When an Entrotec Connect Server is installed, calls from a Call Point to an apartment station will be
managed by the server. To configure the Call Point for synchronisation with the server, follow the
steps in the sections below.
5.2.1
Connect to Web Service and Initialise Device
i.
Connect a laptop or PC to the same network as the Call Point.
ii.
Assign the laptop/PC an IPv4 address from the same range used by the door entry system.
iii.
Use a web browser and enter the IP address of the Call Point in to the address bar.
iv.
Enter a new admin password for the device and press
Next
.
FIGURE 5-11
WARNING
It is important to choose a
secure password
and manage it correctly. If a password is forgotten,
the device may have to be restored to default settings. This may result in data loss.
