Provision
15
5.2.3
Configure Call Point SIP Server Settings
i.
Navigate to
Network Settings
>
SIP Server
.
FIGURE 5-15
ii.
Uncheck
Enable
; this disables the internal device SIP Server which is on by default.
iii.
For
Sever Type
select
Entrotec Connect
.
iv.
Enter the Entrotec Connect Server
IP Address
,
v.
Change
Port
to
5080
.
vi.
Optional
- enter the
Domain VDP
,
SIP Server Username
and
SIP Server Password
.
vii.
Press
Save
.
NOTE
The device will reboot if the internal device SIP Server is enabled or disabled.
5.2.4
Configure the Alternate SIP Server
After applying the
SIP server
settings in Section 5.2.3, the Call Point can be configured to operate
as an alternate SIP Server and take over from the main SIP server to prevent any down time.
i.
Check the
Alternate Server
box. The fields above will be greyed out and populated with the
Call Point details.
FIGURE 5-16
ii.
Click
Save
to save the configuration.
