Entrematic Ditec HA7, Installation And Service Manual

Page: 9 / 50

4 Technical specifications
9 Issue 2020-08-31 1021444-2.0
4 Technical specifications
Ensure that the door operator with technical specification below is suitable for the installation.
Manufacturer: Entrematic
Address: 221A Racco Parkway Vaughan Canada
Type: Ditec HA7
Power supply: 120 V AC +10/-15%, 50/60 Hz, mains fuse max 10A (building
installation)
Power consumption: Max. 90 W
Auxiliary voltage: 24 V DC, max. 400 mA (max. 1000 mA including lock)
Max. weight/width: 200 Lbs.
Note! Refer to section 4.1 and the appropriate standard
(ANSI/BHMA A156.19) for door forces and speeds as related to
door weight and width.
Door width: 762 - 1219 mm (30 - 48”)
Electro-mechanical locking
device:
Selectable: 12V DC, max. 1200 mA or 24 V DC, max. 600 mA
Door opening angle: PUSH arm: 80° - 110°, with reveal 0 - 130 mm (0 - 5 1/8")
PULL arm: 80° - 110°, with reveal 0 - 51 mm (0 - 2")
Opening time (0° - 80°): Variable between 4.5 - 9 s
Closing time (90° - 10°): Variable between 4.5 - 9 s
Impulse time delay: 2 s - 6 h
Ambient temperature: -4 °F to +113 °F (-20 °C to +45 °C)
Relative humidity: Max. 95%
Drive unit weight: 7.5 lb. (3.4 kg)
Class of protection: IP20
Approvals: Third party approvals from established certification organizations
valid for safety in use, see Declaration of Conformity.
Complies with: UL 10C, ANSI/BHMA A156.19 and UL 325