- 36 -
0DT828 2014-06-13
ADJuSTMENT LIMIT SWITCH
1. Activate the door by pressing the appropriate buttons, and check it moves
in the correct direction and If necessary, reverse the movement direction
by modifying the phase sequence, adjusting the line wires upstream of
the main switch.
2. Carry the curtain in the closed position.
3. By means of a screwdriver, turn the “C” cam until the relative micro-switch
is triggered.
4. Carry out the same procedure for the opening limit switch: bring the
curtain to the open door position, and adjust cam “A”.
5. Activate the automation to check the calibration and, if necessary, make
a further adjustment.
49E
1 2 3 4 5 6
ON
• FOR THE ENTRANCE DESCRIPTION TABLE, REFER TO THE TABLE ON PAGE 32
• FOR THE INDICATOR LED DESCRIPTION TABLE, REFER TO PAGE 34
Trimmer
Description
TC
Setting automatic closing time. From 0 to 30 s.
Note: after the activation of the stop command, once contact 1-9 has closed again, the
automatic closing is only activated after a total, partial or step-by-step opening command.
RP
Motor partial opening adjustment. From 0 to 30 s.
0 s
30 s
0 s
30 s
5.2 49E ELECTRONIC CONTROL PANEL - CONNECTIONS
Dip - switch
Description
OFF
ON
DIP 1
Control 1-3 function.
Step-by-Step
Opening
DIP 2
Restore automatic closing
time.
Do not use
100 %
DIP 3
Preflashing set at 3 s.
Disabled during
opening
Enabled for both
opening and closing
DIP 4
Application type.
Do not use
Rapid door
DIP 5
Dynamic brake.
Disabled
Do not use
DIP 6
Double speed
Disabled
Do not use
Ditec Energy
Dip-switches
setting
OuTPuTS
Output
Value
Description
1 +
0
–
24 V = / 0,5 A
Accessories power supply.
Power supply output for external accessories, including automation status
lamp.
0 14
24 V = / 50 W
(2 A)
Flashing light (LAMPH).
Activated during opening and closing operations.
- L K +
24 V = / 0,5 A
Output activated during the door running.
400 V~ / 4 A
Three-phase motor.
Note
: if the direction of rotation of the motor is incorrect for the desired direction
of movement, swap the U - W phases.
U W V
M
3 ~
C
A
A
C
Summary of Contents for Ditec Energy 0DT828
Page 22: ... 22 0DT828 2014 06 13 ...
Page 27: ......