Enterasys NetSight Element Manager, User Manual

Page: 42 / 108

The MicroMMAC-T Chassis View
2-24 Managing the Hub
3. Enter the new time in a 24-hour hh:mm:ss format by highlighting the field you
wish to change and using the up and down arrow buttons to change the time.
4. Click on OK to save your changes, or on Cancel to cancel.
To edit the device date:
1. Click on Device on the Chassis View window menu bar to access the Device
menu; drag down to Edit Device Date..., and release.
2. The Device Date change window, Figure 2-13 , will appear.
Figure 2-13. Device Date Change Window
3. Enter the new date in a mm/dd/yyyy format by highlighting the field you wish
to change and using the up and down arrow buttons to change the date.
4. Click on OK to save your changes, or on Cancel to cancel.
Using an Uninterruptable Power Supply (UPS)
Your MicroMMAC-T supports the use of a UPS (uninterruptable power supply)
through the COM 1 port. (For more information on the use of a UPS with the
MicroMMAC-T, consult the MicroMMAC-T Installation Manual that was
included when you purchased the unit.) You can view or change the status of the
UPS connected to your MicroMMAC-T at the UPS window.
Please note that the UPS window will only be active if you currently have a UPS
attached to your MicroMMAC-T through the appropriate port, and you have
correctly set the SET UPS ID field.
NOTE
In accordance with Year 2000 compliance requirements, NetSight Element Manager now
displays and allows you to set all dates with four-digit year values..
WARNING
Do not set the SET UPS ID field unless you have a UPS attached to the MicroMMAC-T,
or you will disrupt your use of NetSight Element Manager.