The IRM2 Chassis View
2-14
Managing the Hub
2.
Drag down to Module Type.... A Module Type text box, similar to the
examples shown in
Figure 2-6
, will appear describing the board type. If
Module Type is not supported by the selected board, “Unknown” will appear in
the text box.
Figure 2-6. Sample Module Type Text Boxes
Managing the Hub
In addition to the performance and configuration information described in the
preceding sections, the Chassis View also provides you with the tools you need to
configure your hub and keep it operating properly. Hub management functions
include setting device date and time, configuring the IRM2 front panel repeater
port, setting board names, and enabling and disabling ports.
Setting the Device Date and Time
You can select the Edit Device Time and Edit Device Date options from the
Device menu to change the date and time stored in the device’s internal clock.
To edit the device time:
1.
Click on Device on the Chassis View window menu bar to access the Device
menu; drag down to Edit Device Time..., and release. The following change
window,
Figure 2-7
, will appear.
Figure 2-7. Edit Time Window
Summary of Contents for IRM2
