Managing the Hub
2-17
The IRM2 Chassis View
3.
Click on
. The selected port association will take effect; one port will
become the active repeater interface and the other will be administratively
disabled. The Chassis View display for the IRM2 module will update to reflect
the change.
Setting a Board Name
From the Board menus on the Chassis View window, you can change the names
of the manageable boards installed in your MMAC.
To name a board:
1.
Click on the appropriate Board number to access the board menu.
2.
Drag down to Name.... The Board Name Text Box,
Figure 2-10
, will appear.
Figure 2-10. Board Name Text Box
3.
Enter the name of the board, up to 20 characters in length.
4.
Click on
.
Your new name will be applied to the board, and will appear in a number of
board-related windows.
Enabling Boards
From the Board menus in the Chassis View window, you can enable any
manageable boards in your MMAC that are currently disabled by management.
To enable a board:
1.
Click on the desired Board number to access the board menu.
2.
Drag down to Enable. Your board will now be enabled, and the port status for
disabled ports will change from OFF to the appropriate status (ON, SEG,
LNK, or NLK).
Summary of Contents for IRM2
