ENSTROM 280F Series Maintenance Manual Download Page 93

Page: 93 / 694

ENSTROM F-28F/280F SERIES MAINTENANCE MANUAL

Rev.

MM-4-43

Apr

7/15

100 HOUR/ANNUAL INSPECTION GUIDE

Fuel

System:

1) Inspect the fuel tanks for evidence of loose rivets, bond separation, leaks,

condition of gasket in the fuel caps, and proper operation of the fuel caps.

_________

2) Inspect the fuel supply lines for condition, leaks, and security of installation.

_________

3) Inspect the vent and drain lines for obstructions, condition, and security of

installation.

_________

4) Inspect the drain valves and the fuel shutoff valve for leaks, condition,

proper operation, and security of installation.

_________

5) Inspect the scupper bags for looseness, tears, condition, and security of

installation.

_________

6) Inspect the fuel quantity transmitter wiring and transmitter terminals for

evidence of corrosion, condition, and security of installation.

_________

3. COMPONENTS

Components:

1) Inspect components installed on the aircraft for condition, damage, proper

operation, and security of installation.

_________

4. ENGINE

A. Inspect and service the engine in accordance with the Textron-Lycoming O, HO,

AIO, HIO, TIO-360 Series Operator

s Manual (60297-12).

_________

Lubrication

System:

1) Drain the engine oil coolers I/A/W para.4-8 and inspect the oil cooler(s) for

condition, security of installation, and obstruction of airflow.

_________

2) Inspect the cooler clean out doors for condition and security.

_________

3) Inspect the scavenge oil pump for condition, security of installation, and

leaks.

_________

4) Inspect the oil lines for condition, chaffing, and security.

_________

5) Service the engine oil I/A/W para. 4-7.

Fuel

System:

1) Inspect the fuel boost pump for condition, security of installation, operation,

and leakage.

_________

2) Inspect the engine driven fuel pump for condition, security of installation,

and leakage.

_________

3) Inspect the main fuel filter for condition, security of installation, and leakage.

_________

UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED

Visit www.enstromhelicopter.com for instructions to order an original manual and to register for email notification of updates.

Summary of Contents for 280F Series























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 280F Series

Reviews:

Related manuals for 280F Series

Brands by name

Popular brands

ENSTROM 280F Series, Maintenance Manual

Search results

Summary of Contents for 280F Series

Reviews:

Related manuals for 280F Series

Brands by name

Popular brands