Enseo Hd2000 RF, User Manual

Page: 12 / 27

page 12
Lodging System Requirements for Channel Re-mapping:
1. The Lodging System MUST NOT explicitly ‘delete’ the channel
2. The Lodging System MUST NOT add ‘installation data’ for the channel
3. The Lodging System MUST use an ‘Analog Channel Tune’ command to access the re-mapped channel
Switch-On Options Menu
This menu provides options for setting up default settings for when the display first turns on. These settings are par-
ticularly useful in a lodging environment to be sure the display starts on the Startup Channel and to pre-define volume,
screen format and other settings.
1.
Channel
- Allows for the configuration of a default channel:
• None – Allows PPV system to define startup channel
• Startup Channel – Uses the information configured for Startup Channel on Edit Channel Submenu. This
may include an A/V Input. Note: Pro:Idiom encrypted channels are not supported as startup channels at
this time.
• Restore – Returns the TV to the last channel tuned prior to turning off by user
2.
Volume
- Set the numeric value from 0 to 99 that you would like to be used as the default volume level for
the display.
3.
Picture Format
- Select between different formats for the screen and content presented. Options include:
• Native - This setting will show the aspect ratio of the source material. 4:3 NSTC images will be shown
Image 9 – Switch-On Options Menu