page 17
V-Chip Setup
This submenu sets up default options for the V-Chip settings.
1.
Restore User Settings
- This setting allows for the selection of allowing user settings for V-Chip to be stored
between power cycles, or to always use a default setting on power on. Select NO to override the previous user
V-Chip setting on power on, or select YES to allow the previous user setting to be used on the next power on.
2.
V-Chip Menu Item
- This setting controls whether the user has access to the V-Chip selection and settings.
Selecting YES will allow the V-Chip menu item to appear on the user menu. Selecting NO will cause the V-Chip
settings to no be user accessible and they will not appear on the user menu.
3.
Reset Access Code
- This is an open setting to allow for the reset of the code. In set up mode, this code can
be overwritten without knowing the previous
code. This is useful incase the previous user
forgot the code. The code will be reset to the
default code of 0000
4.
Default Limits
- This section allow for various
default values to be set for the tuner.
1.
Enable V-Chip
- This setting is a YES/NO
selection. By setting YES, the default V-Chip
settings will be active when the HD2000RF
starts up. Selecting NO disables the V-Chip
settings.
Image 17 – V-Chip Options Menu
Image 18 – V-Chip Default Limit Submenu
Summary of Contents for Hd2000 RF
Page 1: ...page 1 ...
