www.ensembledesigns.com
Page 71
BrightEye NXT 450 Clean Streaming Router
Installation, Configuration and Operations Guide
Configuring the Encoder
The BrightEye NXT 450 Clean Streaming Router contains both a full featured encoder and a decoder.
Because the encoder and decoder are completely independent, they can be used independently or
together. You can route any 3G/HD/SD SDI baseband source that is connected to the NXT 450 to the
internal MPEG-4 H.264 encoder. The encoder can simultaneously produce a high resolution output for
broadcast and a low resolution output for mobile and hand-held devices.
The encoder’s DVB-ASI formatter provides the option of sending encoded signals back to the routing
matrix as a DVB-ASI signal. You can then deliver the signal to a BNC output or to fiber for delivery to a
distant location.
How the Encoding Menus are Organized
The encoding configuration controls of the unit’s front panel and its web interface are identical, except
that the web interface offers an additional control for configuring Presets for both the High Resolution
Encoder and the Low Resolution Encoder.
From the unit’s front panel, the encoding configuration controls are organized into two sets of eight
submenus—one set for the High Resolution Encoder and a second set for the Low Resolution Encoder:
High Resolution Encoder Menu
Low Resolution Encoder Menu
•
Video Bit Rate
•
Profile
•
Level
•
Audio Bit Rate
•
PMT PID
•
Video PID
•
PCR PID
•
Audio PID
•
Video Bit Rate
•
Profile
•
Level
•
Audio Bit Rate
•
PMT PID
•
Video PID
•
PCR PID
•
Audio PID
