www.ensembledesigns.com
Page 124
BrightEye NXT 450 Clean Streaming Router
Installation, Configuration and Operations Guide
Performing Mix Takes with the Front Panel
Clean Switch Required
In order to perform a Mix take, the destination must have a Clean
Switch assigned to it.
To Enter Mix Mode
For this example, Clean Switch 1 is assigned to Output 4, and the Clean
Switch is configured for Audio Follow Video.
•
When the BrightEye NXT is not in Mix mode, the footer will be
blue and will indicate “Cut CS1 / AFV”.
•
Double-tap the assigned destination shortcut button. The
message “Changing Output 4 Transition to: Mix” displays very
briefly on the front panel screen.
•
The footer, now purple, indicates “Mix CS1 / AFV”.
To Make a Mix Take
The currently selected destination shortcut button illuminates bright
green. The source shortcut button that is currently going to the
selected destination illuminates bright red.
To make a mix take, press a different source shortcut button. The
source assigned to that shortcut button is immediately routed to the
already-selected destination. The mix will occur with the mix duration
specified from the Panel Config > Tran Duration menu.
To Exit Mix Mode
•
Double-tap the assigned destination shortcut button. The
message “Changing Output 4 Transition to: Cut” displays very
briefly on the front panel screen.
•
The footer is now blue, and indicates “Cut CS1 / AFV”.
