Model 7910 HD Upconverter And Cross Converter
When an 8415 Audio Processor submodule is installed, use the
Aud Mix A
and
B
menus
shown next to control the audio mixing and shuffling of the module. Output bus assign-
ments are indicated in green.
For Channels 1 –4, use the
Audio Mix A
menu to set the following:
•
Input Ch 1
– assign Input Channel 1 to the desired output bus or tie to
Channel 2. Set the input level using the slider control or by entering a number in
the pop-up keypad and pressing the
Enter
key.
•
Input Ch 2
– assign Input Channel 2 to the desired output bus or tie to
Channel 1. Set the input level using the slider control or by entering a number in
the pop-up keypad and pressing the
Enter
key.
•
Input Ch 3
– assign Input Channel 3 to the desired output bus or tie to
Channel 4. Set the input level using the slider control or by entering a number in
the pop-up keypad and pressing the
Enter
key.
•
Input Ch 4
– assign Input Channel 4 to the desired output bus or tie to
Channel 3. Set the input level using the slider control or by entering a number in
the pop-up keypad and pressing the
Enter
key.
Selecting the
Tie
button in Input Ch 1 or Input Ch 2 will tie the two controls together.
Selecting the
Tie
button in Input Ch 3 or Input Ch 4 will tie the controls for these
channels together.
Select the
Default
button to return to the default value.
Select the
Invert
button to invert the phase of the audio content.
7910-32
