- 9 -
2.1.3 Installation Process
1) Installation Notice
a) Electrical product should be installed, operated, serviced, and maintained only by qualified personnel. No
responsibility is assumed by the manufacturer for any consequences arising out of the installation of this
product.
b) A qualified person is one who has skills and knowledge related to the construction, installation and
operation of electrical product and who has received safety training to recognize and avoid the hazards
involved.
c) All applicable local, regional, and national regulations must be respected when installing, repairing, and
maintaining this product.
2) Layout Cables
Select the standing positions of the charger on the ground. Lay network cables and power supply cables under
the ground. Cables come out of the ground from the center of standing position with about 100cm length
above the ground.
3) Fix Charger
Locate the footprint of the charger on the ground of standing position. Drill the four screw holes as indicated
below on the ground for the fixation of the charger. Place the charger on the standing position and fix the four
screws.
