INTEGRATED PERIPHERALS SETUP
The INTEGRATED PERIPHERIALS is used to control the values of the I/O
chipset registers. These registers control the mode of HDD type and I/O
address port.
Note:
If you don't use the Onboard IDE connector, than use On-card (PCI or ISA
card ) IDE connector, you will set Onboard Primary PCI IDE : Disabled and
Onboard Secondary PCI IDE : Disabled from CHIPSET FEATURES
SETUP UTILITY. The Onboard PCI IDE cable should be equal to or less
than 18 inches (45cm).
IDE Secondary Master UDMA / IDE Secondary Slave UDMA
Allows you to select the second PCI IDE channel of the secondary master hard disk
mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra DMA, faster
than DMA).
USB Keyboard Support
Choose Disabled (default) or Enabled. You need to use the regular keyboard to get
in the BIOS Setup to enable this function before using the USB keyboard.
Init Display First
Set the Display Card priority for the PCI slot or AGP Slot
